​Quality custom & restoration sheet metal work & repair

​Upper tooling holder will have adpter plates welded.

​ As time allows I will have Kirmit back running Lots of things going on in the shop

​I will be adding more pictures as I put it back together.

Kermit the Power Hammer Rebuild and it's For Sale

The uprights and support bracing are 4x6x3/8 wall and the arms are 4x4x3/8 wall and its rollable.

Lower tooling holder just sitting in place

​To me the upper arms look like frog legs AKA kermit.

​Danny Pascoe Phone Calls always best 206 234 8032

It is for sale with base tooling $3500 or more tooling with an adjusted price increase.

​206 234 8032 Danny.

Several years ago I built this power hammer in my shop and it worked pretty well, it has a 1 hp 220 volt motor with a variable speed VFD foot control.

​Upper and lower tooling is standard 13/16 shanks for planishing hammers so lots of tooling is available.