​Quality custom & restoration sheet metal work & repair

​A  4 1/2 angle grinder cut the welds.

Phone calls always best 

206 234 8032

Danny Pascoe 

​Email carbuilder1947@outlook.com

I have 2 of these they are about 11 1/2 ft long per side.

I will be using this 7 inch tall channel iron I had  for the main frame rails.

I will use this pump I had.

I have never been a big fan of Sand blasting main body parts so that is my reason for building a large Rust Removal and General Stripping Tank.

​I had these trailer stub axels.

​It will be about 8 ft wide and 20 ft long large enough for most body's and frames.

Using a non toxic de ruster, Rust 911

​Wheels and tires from another project, It will be rollable.

​7 sheets plywood for the floor and short side walls.

I cut the tung off and the main rail is 10 ft long 1/2 the length the unit will be.

​The side reinforcements will be removed.

 Rust removal and Stripping Tank build for personal usage.